Use pool brush to brush any un-dissolved granules off pool surfaces. Raises Calcium Hardness Level. Apply over surface area with pump running. 100% Calcium Chloride. per 10,000 gallons top increase calcium hardness 10 ppm.
Pools – Spas – Stoves – Fireplaces BioGuard Balance Pak 300 – 7 lb – Part #23471BIO Purpose: BioGuard Balance Pak 300 is a calcium hardness increaser This product boosts calcium hardness to help prevent equipment corrosion, etching of plaster and wrinkling of liners Balance Pak 300 has a unique palletized formulation which means faster dissolving and less cloudiness It is important to keep your pool water balanced in order to get the most effective use out of your chemicals Keep your calcium hardness levels up with BioGuard Balance Pak 300! Product Dosage: 1 lb per 10,000 gallons of pool water will raise calcium hardness 10 ppm Directions: Add 4 pounds of Balance Pak 300 to raise calcium hardness by 40ppm directly to pool water by scattering over the water surface Do not pre-dissolve this treatment as heat is generate when the product contacts water Use a surface compatible brush to brush any undissolved granules off pool surfaces Let pump run at least 2 hours after treatment General Policies Keep your home running smoothly with Clearview, the Clear Choice for your pool, spa and hearth needs! If you have any questions, please contact us before buying. We pride ourselves on offering exceptional customer service and helping to provide you with the complete information you need to make an informed purchase. Shipping and Billing: We only accept payment from and ship to confirmed PayPal addresses All packages are shipped within one day of ordering Returns: Returns are not accepted on opened or used products and are subject to 10% restocking fee If a package arrives damaged or defective, please report it to use immediately so we can promptly take care of the situation Questions: If you have any questions, please contact us. We will always take the time to answer your questions. We have over 25 years in the industry, so don’t hesitate to ask! We’ve probably heard it before! Business Hours: Weekdays 9 – 5 | Saturday 9 – 4 | Eastern Time
Enhance the beauty and health of your outdoor sanctuary with our Whisper Quiet Pond Bubbler System, specially designed for ponds up to 1,000 gallons. This essential aeration solution increases water circulation and oxygen saturation, revitalizing the natural ecosystem of your backyard pond, water garden, or small outdoor fishpond.
SpaGuard Enhanced Shock – 2lb – Part #42621BIO. This multipurpose shock is pH buffered to prevent changes to your spa’s delicate pH balance. We have over 25 years in the industry, so don’t hesitate to ask!
Dry Tec 68% Calcium Hypochlorite Granular Swimming Pool Shock – Choose Quantity Our Dry Tec 68% Calcium Hypochlorite formula works similarly to Sock-It, however, Dry Tec does not run the risk of bleaching vinyl pool liners. This allows for the shock to be evenly broadcast over your pool’s surface. Note: DO NOT MIX! 1 bag (1-pound each) Fast-Acting Quick-Dissolving Swimming Pool Sanitizer Kills bacteria, controls algae and destroys organic contaminants in pools 68% calcium hypochlorite Recommended Dosage: 1 pound per 10,000 gallons of water HOW TO USE: Use entire contents of the bag when opened. If any granules settle to the bottom of the pool use brush to disperse. Add the recommended dosage of this product during evening hours while the filter pump is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. If any granules settle to the bottom of the pool use brush to disperse. WATER BALANCE: For best product performance, swimmer comfort, and crystal clear water: Maintain pH in the range of 7.2 to 7.6. Maintain total alkalinity in the range of 60 to 120 parts per million (ppm). Maintain calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Use our pool care products to make adjustments. Follow label directions for each product. Do not enter the pool until the free available chlorine residual is 1-4 ppm for each of the below noted water treatment applications. OPENING YOUR POOL: For best results, see the “WATER BALANCE” section above before treatment. Always adjust and maintain pH in the 7.2 to 7.6 range. Follow “SHOCK TREATMENT” directions on this package. Allow 30 minutes for the product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed. ROUTINE CHLORINATION: For best results, see the “WATER BALANCE” section above before treatment. Throughout the pool season, adjust and maintain pH at 7.2 to 7.6. check available chlorine with a suitable test kit. SHOCK TREATMENT/SUPERCHLORINATION: For best results, see “WATER BALANCE” and “HOW TO USE” section above before treatment. Every 7 days, or as necessary to prevent pool problems, shock treat/superchlorinate the pool by adding one bag of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems that are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit. STORAGE AND DISPOSAL: Keep this product dry in its tightly closed container when not in use. Store in a cool, dry, well-ventilated area. Keep away from heat or open flame. Nonrefillable container. Do not reuse or refill this container. Rinse empty container thoroughly with water to dissolve all material prior to disposal. Offer for recycling if available. Do not contaminate food or feed by storage or disposal or cleaning of equipment.
Pools – Spas – Stoves – Fireplaces BioGuard Algae All 60™ – 1 Quart – 2 Pack DescriptionBioGuard Algae All 60 is a highly effective algae preventative. It is recommended by the manufacturer for use with pools with attached spas or jetted returns. This product treats stubborn algae growths in chlorine or bromine pools. It is formulated to be non-foaming and non-staining. This product is effective on all types of algae and works in all pH ranges. Algae All 60 will not affect pH level.DosageRoutine Maintenance:2-3 fl oz per 10,000 gallons of water.Light Algae Growth:11-17 fl oz per 10,000 gallons of water.Initial Treatment of Clean Pools:6-11 fl oz per 10,000 gallons of water.DirectionsPre-Treatment Checklist:Ensure all equipment is working properly.Backwash the filter system following manufacturers directions.Adjust the pH to between 7.2-7.6.In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals.Adjust chlorine residual to 1-3 ppm. When using other products as outlined in directions for this product, always follow directions on those products.Standard Application:For pools having light algae growth, pour the initial dose of 11-17 oz. per 10,000 gallons of water directly into pool.Remove settled algae debris by cleaning.For treatment of a freshly cleaned and filled pool, pour the initial dose of 6-11 oz. per 10,000 gallons of water directly into pool.Additions of 2-4 oz. of this product per 10,000 gallons of water should be made every 5-7 days after initial treatment for maintenance.Wait at least 15 minutes after application before entering pool. Ingredients:Poly [Oxyethylene (Dimethylininio) ethylene (dimehylimino) ethelene dichloride]: 60%, Other Ingredients: 40% General Policies Keep your home running smoothly with Clearview, the Clear Choice for your pool, spa and hearth needs! If you have any questions, please contact us before buying. We pride ourselves on offering exceptional customer service and helping to provide you with the complete information you need to make an informed purchase. Shipping and Billing: We only accept payment from and ship to confirmed PayPal addresses All packages are shipped within one day of ordering Returns: Returns are not accepted on opened or used products and are subject to 10% restocking fee If a package arrives damaged or defective, please report it to use immediately so we can promptly take care of the situation Questions: If you have any questions, please contact us. We will always take the time to answer your questions. We have over 25 years in the industry, so don’t hesitate to ask! We’ve probably heard it before! Business Hours: Weekdays 9 – 5 | Saturday 9 – 4 | Eastern Time Disclaimer: I will follow all applicable federal and state laws and regulations regarding the sale of the pesticideI won’t accept bids from, sell to, or ship to states in which the pesticide is not registered as a general-use product
POOLRX PLUS BLUE POOL UNIT WITH SILVER 7.5K-20K GAL (POOLRX – 331001) FREE SHIPPING! MANUFACTURER:POOLRX PART NUMBER: 331001 ALTERNATIVE SKU: PRX-50-1001 DESCRIPTION: PoolRx+ contains a proprietary blend of minerals that continuously and effectively eliminate algae for up to 6 months. These minerals immediately dissolve out of the cylinder and form a stable residual throughout the whole body of water. During the pool’s filtration process the minerals are rejuvenated every time they return and pass through the cylinder. Treats 7.5K – 20K gallons of waterEliminates All types of Pool AlgaeEffective for up to 6 MonthsReduces Chemical DemandSimplifies Pool CareIdeal for Chlorine, Salt, UV or Ozone systemsNSF/ANSI 50 CertifiedEPA # 79817-4 PoolRx+ improves the saltwater experience. The minerals reduce the salt chlorine production needed to keep your salt pool algae free. Less salt chlorine production extends the life of the salt cell and reduces the amount of acid needed to balance the pH. PoolRx+ prolongs the life of your equipment, saves you money, and improves the quality of your water. Keep the unit in the pool even after minerals are dissolved in the water. The unit rejuvenates the minerals as they pass back thru it. Pre InstallationTest the water for metals like copper or iron. If the levels are above 0.2 ppm see [Maintenance Tips] tab bellow on how to remove them.Choose the right PoolRx+ product based on the pool or spa total gallons of water.;Start with a clean filter;Set your type of filter correctly (refer to [Recommended Filter Settings] tab bellow);Check that pH is between 7.2 and 7.8;Check that chlorine level is below 10.00 ppm.InstallationPlace the unit in the skimmer (if there is good water flow), or pump basket. Note: All minerals dissolve out of the unit and into the water within 6 hours. It is safe to swim as soon as the unit is placed in the water. Post Installation (Maintenance)Note: PoolRx minerals start eliminating algae and bacteria immediately, which will be captured by the filter. Clean the filter more frequently until the pool is clear;Vacuum any dirt or debris in the pool frequently;If the water is green or cloudy, maintain a chlorine level of 2.0 ppm until it clears;If the water is clear, maintain a chlorine level of 0.5 ppm to 1.00 ppm;Maintain the water pH between 7.2 and 7.8;No need for speciality chemicals like algaecides, phosphate removers and sequestration agents. Do not use with bromine or biguanides products.CONDITION:New STORE POLICIES:We can ship outside the contiguous 48 states but will require contact prior to purchasing (ADDITIONAL FEES WILL APPLY). Ask about BULK DISCOUNTS.Available Mon-Fri 9-5 (PST)
PoolRx+ contains a proprietary blend of minerals that continuously and effectively eliminate algae. The specially treated alloy cylinder is packed with PoolRx+ granular formulation. These minerals immediately dissolve out of the cylinder and form a stable residual throughout the pool water for up to 6 months. The minerals eliminate the algae while freeing up low levels of chlorine to be more active and productive in the water. During the pool’s filtration process the minerals are rejuvenated every time they return and pass through the cylinder. PoolRx+ works synergistically with a constant low level of chlorine.Active Ingredients:• Copper Sulphate Pentahydrate: 86.85%• Zinc Sulfate Monohydrate: 1.51%• Silver Nitrate: 0.40%• Other Ingredients: 11.24%
PoolRx Blue Mineral Chemical Removes Algae For Swimming Pools – (Various Size) PoolRx™ helps eliminate algae and reduce the amount of chemicals used to sanitize the pool. Place it in your skimmer or pump basket, and it instantly becomes effective. The specially treated alloy cylinder is packed with a proprietary blend of minerals that rejuvenate every time they pass back through the cylinder. The cylinder last up to 6 months, at which time you may need to add a booster pack according to the gallons of pool water. PoolRx™ is also ideal for salt water pools by reducing the salt chlorine production needed to keep your salt pool algae free. Less salt chlorine production extends the life of the salt cell and reduces the amount of acid needed to balance the pH. Directions For Use Clean or backwash pool filter Place the unit into pump basket or skimmer ideally in pump for increased water flow Initial run time at least 3-4 hours to ensure minerals completely dissolve Pump should run during the heat of the day at least 6-8 hours Do not re-clean or backwash filter for at least 2 weeks Maintenance Maintain chlorine 0.5ppm – 1.0ppm Maintain pH 7.2 – 7.8 Maintain alkalinity 80 – 120 Maintain cyanuric acid 10 – 80 Replace the unit every 12 months Add PoolRx™ booster after 4 – 6 months if needed No need for phosphate removers, algaecides, clarifiers PoolRx is not compatible for use with bromine or biguanides
PoolRx™ is also ideal for salt water pools by reducing the salt chlorine production needed to keep your salt pool algae free. Less salt chlorine production extends the life of the salt cell and reduces the amount of acid needed to balance the pH.
A Decade of Selfless Service” Founded in 2011 in Thane, Sneh Seva Trust was established with a vision: to bridge the gap between quality healthcare and those who cannot afford it.